Hanging your wallpaper is not hard when you have superior instructions to follow. Are you ready to transform your space?

If wallpaper is a new endeavor for you, be certain to select your variety carefully by reading the various kinds at the store. The type of wallpaper you choose will influence the installation requirements. Pre-pasted wallpaper features a dry paste that is already connected to the back of the paper. This sort of wallpaper employs water to trigger the paste. The unpasted varieties have to have a wet paste that is put on when installing.. Generally, the strategy is the same for installing, however, the instructions may differ according to which type.



The majority of wallpaper applications abide by these steps: measure, cut, trigger with paste or water and hang up.

Wall Preparation

You need to work with clean surfaces and a clear work space before you begin. Remove all wall fixtures and check that any electrical outlets are switched off. Properly clean and organize wall surfaces by eradicating paste residue and previous wallpaper. TSP and additional wall cleaners will be helpful.

Count on a premixed universal primer specific for wallpaper to be sure your surface is prepared. Priming the wall is a crucial step when you are affixing unpasted wallpaper given it allows easier removal of the wallpaper later.

Measure & Activate the Paper

The size of the wall is your first measurement. Once you have that measurement, add four inches and next cut the wallpaper. The goal is to permit the paper to overlap the baseboard and the ceiling by approximately two inches.

Pro Tip: Allow for pattern match, via drop match, straight across or random.



If hanging unpasted wallpaper…

You can either apply the paste to the wall or paste the paper. If you want to paste the wall, apply it evenly and cover a portion for one wallpaper strip at a time. If you decide to paste the paper, operate from the centre to the edges and smoothly coat the rear of the wallpaper. Next, loosely fold the moistened strip with the pasted pieces together. Give it time to sit for three minutes in a process known as “booking.”

Experiment to see if you prefer pasting unpasted variations by applying the paste to the paper or even the wall. Be sure to only paste one region of the wall at one time if you are pasting the wall. If you're applying paste to the wall, simply paste one area at a time. If you are employing the paste to the paper, place an even coating of paste on the wallpaper backing. Start in the middle of the wallpaper and work to the exterior edges. Slowly fold the moistened wallpaper strip and maneuver the pasted sides together so the booking strategy can occur. Allow the already folded wallpaper to sit like this for three minutes.

Pro Tip: If hanging heavyweight wallpapers, particularly unpasted types with flock, cork, or embroidery, pick a clear, stain-free heavyweight pre-mixed paste adhesive instead of a light-medium weight clear paste for best results.

When hanging pre-pasted wallpaper…

Roll your cut strip loosely and get the patterned side facing inward and the pasted side outward. Next, submerge the rolled strip for thirty seconds into tepid water to activate the paste. Some like using a Wallpaper Hand Sprayer to employ a fine mist to stimulate the paste.

Spray the wallpaper backing in long strokes running the length of the wallpaper to completely saturate the strip. Make sure you focus on the edges to ensure even water application. Fold each end sections of your moist strip toward the midsection with the pasted portions alongside one another. Don’t enable the edges to dry out by making sure they are in-line. Last, roll your strip as if you would roll a newspaper and permit it to sit for three minutes so the paste can initialize while the paper grows more flexible.



Hanging your first strip

As soon as the booking is finished, take your strip to the wall. Carefully unfold the product and hang it. Let the wallpaper overhang on the ceiling along with the baseboard. Take out any air bubbles with a smoothing brush or broad knife or a plastic smoother. Ensure that the piece has adequate exposure to the wall by pressing on the wallpaper. Don’t distort or stretch out the wallpaper. Lightly flatten seams with a seam roller.

Proceeding to the second strip

If you are butting the 2nd strip up to the first, position the second strip of wallpaper to the edge of the first strip. Firmly and efficiently press the wallpaper into position. Make sure you wash the ceiling and the baseboard after to remove any residual paste. Ideally, your joints really should be vertical with a tight fit. You want the whole lot free from paste and air bubbles.

Once you have placed three panels properly to the wall and removed excess paste, set aside a second to examine your work. Check the sheets for color and design uniformity. Continue on installing three panels by doing this at a time. Allow yourself more installation and selvage trimming time when you're dealing with complex patterns and geometrical designs. Tune in to your body and take pauses when you detect your arms and eyes are getting tired. Don’t hasten your wallpaper project. Follow the steps in this article to hang all of your strips. Lastly, mindfully cut the extra trim along the ceiling and baseboards. It is recommended that you count on a guide and a razor knife to facilitate trimming without tearing.